Storz Thermoflator Manual De Instrucciones página 68

60
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and the
The Thermo ator ® model 26 4320 20-1 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or user of the unit can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the unit as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output power of
transmitter
[W]
0.01
0.1
1
10
100
For transmitters whose maximum nominal power is not listed in the above table, the recommended separation distance d in meters [m] can be deter-
mined using the equation belonging to the relevant column, where P is the maximum nominal power of the transmitter in Watts [W] as speci ed by the
manufacturer of the transmitter.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. The propagation of electromagnetic quantities is affected by absorptions and re ections of
buildings, objects and persons.
Appendix
Electromagnetic Compatibility
(EMC) Information
Table 6
Thermo ator model 26 4320 20-1
®
Separation distance d [m]
according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz
3 5 .
⎡ ⎤
=
⎢ ⎥
3
⎣ ⎦
0.12
0.38
1.2
3.8
12
Anexo
Indicaciones sobre compatibilidad
electromagnética (CEM)
800 MHz to 2.5 GHz
3 5 .
⎡ ⎤
= =
⎢ ⎥
3
⎣ ⎦
0.12
0.38
1.2
3.8
12
7
⎡ ⎤
⎢ ⎥
3
⎣ ⎦
0.23
0.73
2.3
7.3
23