Idiomas disponibles
Idiomas disponibles
15. Troubleshooting
Fault
Engine cannot be started
Generator has insufficient or no
voltage
16. Maintenance plan
Always comply with the following maintenance intervals in order to ensure problem-free operation.
ATTENTION! At initial start-up, engine oil and fuel must be filled.
Before every use
Checking the engine oil
Changing the engine oil
Checking the air filter
Cleaning the air filter
Visual inspection of the
device
Cleaning the spark plug
Check and readjust the throt-
tle valve
Cleaning the cylinder head
Adjust the valve play
Attention: Only have points "X*" carried out by an authorised specialist company.
Cause
Automatic oil cut-off starts
Spark plug sooty
No fuel
Electronics defective
Overload protection switch tripped
Air filter dirty.
after operating for
20 hours
X
first time, then every 50
hours
X
X
Measure
Check oil level, fill with engine oil
Clean or replace spark plug.
Top up with fuel
Repair by an authorised service centre.
Restart generator.
Reduce consumers
Clean or replace filter
after operating for 50 hours after operating for
300 hours
X
Change filter insert if
necessary
X
Gap: 0.6 - 0.7 mm, replace
if necessary
X*
X*
X*
11
GB/IE/NI/CY/MT
