Idiomas disponibles
Idiomas disponibles
2. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and suc-
cess.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised special-
ists.
• Installing and replacing non-original spare parts,
• Application other than specified,
Please consider:
Read through the complete text in the operating manual be-
fore installing and commissioning the device.
The operating manual is intended to help the user to become
familiar with the machine and take advantage of its applica-
tion possibilities in accordance with the recommendations.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding
danger, for minimising repair costs and downtimes, and for
increasing the reliability and extending the service life of the
device.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the device in your country.
Keep the operating manual package with the machine at all
times and store it in a plastic cover to protect it from dirt and
moisture. They must be read and carefully observed by all
operating personnel before starting the work. The device may
only be used by personnel who have been trained to use it
and who have been instructed with respect to the associated
hazards.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules for operating devices of the same
design must also be observed.
We accept no liability for accidents or damage that occur
due to a failure to observe this manual and the safety in-
structions.
4
GB/IE/NI/CY/MT
3. Device description (Fig. 1 - 14)
1.
Carrying handle
2.
Tank cover
3.
Engine cover
4.
Spark plug cover
5.
Reverse starter
6.
Operating display
7.
Overload indicator
8.
Oil warning indicator
9.
230 V~ socket (2x)
10. Energy saving switch
11. USB - connection (2x)
12. Earthing screw
13. On/off switch with choke
14. Funnel
15. Spark plug wrench
16. Oil dipstick
17. Wing screw
18. Air filter cover
19. Air filter
20. Spark plug
21. Spark plug connector
22. Fuel filter insert
23. Fill level marking
4. Scope of delivery
• Power generator
• Spark plug wrench
• Funnel
• Operating manual
5. Proper use
The power generator is suitable for devices that are intended
to operate on a 230 V
AC voltage source. With household
~
devices and electronic devices, please check the suitability ac-
cording to the respective manufacturer's specifications.
The machine may only be used in the intended manner. Any
use beyond this is improper. The user/operator, not the manu-
facturer, is responsible for damages or injuries of any type
resulting from this.
An element of the intended use is also the observance of the
safety instructions, as well as the assembly instructions and
operating information in the operating manual.
Persons who operate and maintain the machine must be fa-
miliar with it and must be informed about potential dangers.
In addition, the applicable accident prevention regulations
must be strictly observed.
Other general occupational health and safety-related rules
and regulations must be observed.
The liability of the manufacturer and resulting damages are
excluded in the event of modifications of the machine.
Please observe that our equipment was not designed with the
intention of use for commercial or industrial purposes. We as-
sume no guarantee if the equipment is used in commercial or
industrial applications, or for equivalent work.
