Corghi EXACT 7000 Manual De Uso página 86

ROC key pressed too quickly
➥ Switch the wheel aligner off then repeat the
ROC operations slowly; if the defect does not
appear, skip compensation (ROC 0) and call
the after-sales service.
Data transmission defective or beam ob-
structed
➥ Remove the obstacle which is obstructing the
measuring beam and/or level the sensors.
steering wheels not straight
ROC routine performed incorrectly
➥ Repeat ROC taking care that the correspond-
ing wheel on the opposite side of the vehicle
does not rotate or steer (in the case of steer
wheels).
Sensors not calibrated
➥Calibrate the sensors.
CALIBRATIon
Data on red background persist
with sensors fitted on calibrator,
connected correctly and levelled
Something is obstructing the passage of the
infrared beam between the goniometers
➥ Remove the obstruction.
One or more transducers out of tolerance
range
➥ Call the service centre and do not use the
wheel aligner.
REMoTE ConTRoL
Program does not change when
keys are pressed
Battery flat
➥ Replace the battery.
Distance between remote control and central
unit too great
➥ Move closer: max distance 6m.
Remote control pointing in wrong direction
➥ Point the remote control towards the eye of
the receiver.
➥ Hold the remote control properly.
Too much ambient light
➥ Move closer.
86
PRInTER
Does not switch on
Printer switch "OFF"
➥ Turn the printer switch to "ON".
No power
➥ Check that the printer plug is connected cor-
rectly.
switches on but does not print
Cable crushed between steel plate parts
➥ Position the cable correctly.
Printer in standby status, "on line" LED off
➥ Press the "ON LINE" button to illuminate the
LED.
Does not print properly
Print head failure
➥ Call the service centre.
Printing too pale
Ink ribbon worn out or broken
➥ Change the cartridge, following the instructions
in the printer manual.
"ERRoR" LED on - "ERRoR" LED
flashing
No paper
➥ Fit fresh sheets of paper, following the instruc-
tions in the printer manual.
WARNING
the "Spare Parts" manual does not authorise
the user to do any work on the machine except
for that specifically described in the operator's
manual, but does enable the user to provide
accurate information to the after-sales service,
in order to reduce service times.
Operator's Manual EXACT 7000