Corghi EXACT 7000 Manual De Uso página 67

__ Vehicle registration number: In the man-
agement function job records are sorted by
vehicle registration number.
__ Operator:In the management function job
records are sorted by operator.
__ Order number: In the management function
job records are sorted by order number.
➥ Customer correspondence
__ No.
➥ Enable modifications
__ Yes: allows modification of the adjustment
data of a job saved in the memory.
__ No:
Alignment procedure customisation
➥ Vehicle weight procedure enabling
__ YES: vehicle weight procedure enabled
__ NO: vehicle weight procedure not enabled.
➥ Visual check enabling
__ YES: vehicle visual check procedure ena-
bled.
__ NO: vehicle visual check procedure not ena-
bled.
➥ Lift test
__ Yes: recalls the lift test, "LIFT AND SENSOR
CHECK" section, at switch-on
__ No
➥ Vehicle selection
__ Always activated: Selection of vehicle from
data bank always activated.
__ On request: Selection of vehicle from data
bank activated on request.
➥ Vehicle selection mode
__ Databank: Selection of vehicle from data-
bank, job record compilation on request
__ Job record:compilation of job record with
activation of vehicle from databank if neces-
sary.
➥ Rim diameter
__ Always: If toes are set in millimetres or inches
the step for input of the rim diameter is always
activated.
__ On request: If toes are set in millimetres or
inches the step for input of the rim diameter
is activated by the operator, or automatically
if the reference diameter is not available in
the databank.
Operator's Manual EXACT 7000
➥ R.O.C.
__ Always: R.O.C. procedure is compulsory.
__ Manual skip: R.O.C. procedure is always acti-
vated but can be skipped in manual mode.
__ Automatic skip: R.O.C. procedure is skipped
automatically (can be performed later by
manual recall).
➥ Caster measurement steering lock
__ Always activated: Caster measurement steer-
ing lock always activated.
__ On request: Caster measurement steering
lock activated on request.
__ If adjustable: Caster measurement steering
lock only recalled if at least one of the angles
that can be measured is adjustable (caster,
king pin, steering angle difference at 20° and
maximum steering angle).
➥ Rear
__ Always activated: Rear axle adjustment always
activated.
__ If adjustable: Rear axle adjustment only ac-
tivated if at least one of the angles that can
be measured is adjustable (half toe, camber,
total toe, set-back).
Wheel Aligner Customisation
➥ Electronic turntable enabling
__ Always: electronic turntables for maximum
steering angle always enabled.
__ On request: electronic turntables for maxi-
mum steering angle enabled on request
during steering angle measurement.
__ Never: electronic turntables for maximum
steering angle never enabled.
➥ Axis of reference
__ Symmetry: axis of symmetry is axis of refer-
ence for both front and rear.
__ Thrust: thrust axis is axis of reference for both
front and rear. Setting the steering-wheel
with the front half toe values equal ensures
the steering wheel will be straight in normal
operating conditions. If the thrust axis is axis
of reference for the rear axle, the rear half toe
values area always identical.
__ Straight steering wheels: reference axis is
axis of symmetry for rear and thrust axis for
front. Setting the steering-wheel with the front
half toe values equal ensures the steering
wheel will be straight in normal operating
conditions.
GB
67