Units Of Measurement; Technical Assistance; Status Bar; Pc Keyboard - Corghi EXACT 7000 Manual De Uso

Units of measurement

Unit of measurement Selects the units
of measurement of the data on screen.
Weight unit of measurement Switches
the weight unit of measurement between kilo-
grams and pounds.
Degrees or lengths Switches the display
of values between units of length and degrees.
Length unit of measurement Switches
the length unit of measurement between mil-
limetres and inches.
Unit of measurement in degrees
Switches the unit of measurement for angle
values between grades and degrees.
Pressure unit of measurement Switches
the unit of measurement for pressure values
between PSI and BAR.

Technical assistance

Smart Card upgrade Main smart card
upgrade procedure.
Smart Card Data Record Smart card
reading.
Job counter Displays the number of
jobs done.

status bar

The status bar shows messages of use during
execution of the program, in graphic form.
Insert mode, Use of the ← and →
keys moves the cursor around inside the field
and not between two adjoining fields.
"Demo" mode Car procedure for which
the sensors are not required.
Maximum steering angle enabled.
Operator's Manual EXACT 7000
Non standard toe sign convention.
Non standard thrust angle sign con-
vention.
Save job in progress.

PC Keyboard

The keyboard function keys give rapid access
to program steps. They always retain the same
functions and are only active if the relative icon
is included in the screen.
The keys shown in the example below as È+F12
are the combination of the "Cap Shift" key and
the key shown, F12 in this example.
Key Name
F1 Databank selection
F2 Rim diameter
F3 Chassis clearance
F4 Steering angle
F5 State of vehicle
F6 Rear axle
F7 Front axle
F8 Print
F9 End of job
F10 Vehicle adjustments
F11 Databank
F12 Help
Icon
GB
63