Terumo Hiryu Manual Del Usuario página 24

1. Remove the second balloon protection sheath from the compliance sheet.
2. Insert the stylet inside the balloon protection sheath.
3. Insert the stylet and balloon protection sheath from the tip of the catheter, and carefully cover
the balloon with the stylet and balloon protection sheath.
CAUTION
∗
4. When using the catheter, after wetting the balloon protection sheath at the tip of the catheter
in a physiological saline solution, carefully remove the balloon protection sheath and stylet
without damaging the balloon.
CAUTION
Fig. 1
PRECAUTIONS FOR STORAGE
Avoid exposure to water, direct sunlight, extreme temperature, or high humidity during storage.
REFERENCES
The physician should consult current medical literature on balloon dilatation, such as that published by
ACC/AHA
11
Failure to observe this warning could cause the balloon to not inflate due to
balloon deformation and damage of the shaft.
Do not forcibly insert the balloon into the balloon protection sheath. Lightly
twist the balloon and carefully insert it.
Do not remove the balloon protection sheath by force if resistance is
encountered. Forcible removal could cause the balloon to not inflate or
deflate.
Fig. 2
Guide wire port
Fig. 3