Service And Adjustments; Tractor; To Remove Mower - TRAPP 48L22AH0x8A Manual De Instrucciones

www.trapp.com.br
5. Open the tap.
6. Sit on the operator's seat on the tractor, restart
the tractor and place the accelerator lever in
the "Fast" position.
Important:
Check the area once more, making sure that
it is free.
7. Move the clutch control of the tractor
implement to the "ENGAGED" position.
8. Move the clutch control of the tractor
implement to the "DISENGAGED" position.
9. Pull the blocking ring of the mouth adaptor to
disconnect the adaptor from the mouth of the
washing opening.
Warning!
To avoid severe injury, before performing any service or adjustment:
1. Depress clutch/brake pedal fully and set parking brake.
2. Place motion control lever in neutral (N) position.
3. Place attachment clutch in "disengaged" position.
4. Turn ignition key to "STOP" and remove it.
5. Make sure the blades and all moving parts have completely stopped.
6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

Tractor

To remove mower

1. Place attachment clutch switch in
"disengaged" position.
2. Move attachment lift lever to its lowest
position.
3. Disengage belt tensioner bar (K) from support (L).

Service and Adjustments

10. Place the clutch control of the implement
in the "ENGAGED" position to remove the
excess of water and help in drying before
putting away the tractor.
Warning:
A washing accessory which is broken or
missing may expose it or third parties to
thrown objects due to contact with the blade.
Immediately replace broken or missing
 
washing accessories before once more
using the mower.
Fasten bolts and locking nuts on all
 
the orifices of the mower.
Caution!
The belt tensioner bar behaves like a spring.
Hold it tight and slowly release it.
4. Roll belt off electric clutch pulley (M).
5. Disconnect mower front link (E); remove
retainer spring and washer.
127