Cleaning - TRAPP 48L22AH0x8A Manual De Instrucciones

Clamp
Fuel filter

Cleaning

Clean engine, battery, seat, finish, etc. of all
 
foreign matter.
 C lean the residues from the steering plate.
Residues may limit movement of the clutch/
brake pedal shaft, causing belt slippage and loss
of steering.
Caution!
Avoid all pressure points and moveable parts.
Steering
plate
Steering system, dash, fender and brushcutter not shown.
K eep finished surfaces and wheels free of all
  
gasoline, oil, etc.
Protect painted surfaces with automotivetype
 
wax.
It is not recommended to use a garden hose or
 
pressure washer to clean your tractor unless the
engine and transmission are covered to keep water
out. Water in engine or transmission will shorten
the useful life of your tractor. Use compressed air
or a leaf blower to remove grass, leaves and trash
from tractor and mower.
126
Clamp
Clutch/brake
pedal
Clean the
upper part
Pressure
points
Platform washing opening
Your tractor has a wash opening on its surface as
part of the platform washing system. It should be
used after each use of the tractor.
1. Conduct the tractor to a flat, free location on
your lawn, sufficiently close to a water tap to
be within reach of the hose.
Important:
Make sure that the discharge opening of the
tractor is not directed to the house, garage,
parked cars, etc..
Remove the bag or cover waste, if it is placed.
2. Check if the clutch control of the implement
is in the "DISENGAGED" position; activate
the parking brake and turn off the engine.
3. Screw the mouth adaptor (supplied together
with the Operators Manual of the tractor) onto
the end of the garden hose.
4. Pull the blocking ring of the mouth adaptor
backwards and pull the adaptor to the
platform washing door at the left extremity of
the mower platform. Release the blocking ring
to attach the adaptor on the mouth.
Mouth adaptor
Important:
Pull the hose to check if the connection is
secure.
www.trapp.com.br
Hose
Washing
opening