TRAPP 48L22AH0x8A Manual De Instrucciones página 129

www.trapp.com.br
3. Place mower under tractor in central position.
4. First install anti-sway bar (S).
On mower right-hand side, place anti-sway
 
bar into hole on transmission support (T).
Secure the bar in your direction, and place
 
the other end into the hole on the rear bracket
(D). Move mower as necessary to place the
bar.
Secure with a washer an
 
as shown in the figure.
d a retainer spring,
5. Connect suspension arms regarding
mower side to chassis. Position arm hole
over the pin (B) on the external part of tractor
chassis, and secure with a washer and a
retainer spring.
6. Repeat the procedure on the other side of the
tractor.
7. Connect rear lift link (C). Insert the
extremity of the rear lift connecting rod (C)
in hole (U) on the suspension arm of the
tractor lift shaft and turn the connection in the
direction of the brushcutter.
Raise mower rear corner and position the link
 
assembly groove over the rear bracket pin (D);
secure with a washer and a retainer spring.
8. Repeat the procedure on the other side of the
tractor.
9. Turn the steering wheel so that the wheels
face the front.
129