Additional Safety And Operation Instructions; Product Specification - TRAPP 48L22AH0x8A Manual De Instrucciones

Remove any gasoline equipment from the
 
truck or trailer before filling it; do it on the
ground. If that is not possible, refill the
equipment with a portable container. Do not
use the gasoline pump hose.
Always keep the hose nozzle in touch with
 
the edge of the fuel tank or with the opening
of the container until it is filled up. Avoid
using nozzle opening and closing devices.
Should fuel spill on your clothes, change
 
them immediately.
Do not overfill the tank. Replace the cap and
 
close it tight.
8. Additional safety and
operation instructions
Never operate the tractor or leave the engine
 
running indoors or without ventilation. The
exhaust gas contains carbon monoxide, an
odorless and lethal gas.
Frequently check screws and nuts for
 
tightening, and keep them in their places to
make sure the equipment is operating under
safe conditions.
Model
Cutting range
Gas tank capacity
Fuel
Type of oil (API-SG-SL)
Oil tank capacity
(crankcase)
Spark plug - gap:
1 mm (0.04")
Charging system
Battery
Blade bolt torque
Speed
108

Product Specification

48L22AH0X8A - 22 hp
48" (1220 mm)
11.35 liters
Without oil filter: 1,77 L / With oil filter 1,89 L
35 A/h - 280 CCA minimum - Housing size: U1R
Forward 0 - 8.85 km/h
(automatic)
Reverse 0 - 3.86 km/h
Never tamper with safety devices. Check
 
their proper operation regularly. Many
accidents are caused by the lack of adequate
maintenance.
Keep machine free from grass, leaves, or other
 
debris build-up. Clean oil or fuel spillage.
Allow machine to cool before storing.
Stop and inspect the equipment if you
 
strike an object. Repair, if necessary, before
restarting.
Frequently check the grass catcher and
 
the discharge guard. Replace if necessary.
Always replace for parts recommended by the
manufacturer.
Mower blades are sharp and can cut. Wrap
 
the blade(s) or wear gloves, and use extra
caution when servicing them.
Never carry passengers.
 
Check brake operation frequently. Adjust and
 
service as required.
Keep or substitute safety/instructions label if
 
necessary.
Danger!
Whenever cleaning or servicing, make sure the
equipment is off and the blades are stopped.
48G24G60X8A - 24 hp
48" (1220 mm)
15.14 liters
Gasoline, unleaded regular
20 W 50
Champion QC12YC
16 A a 3600 rpm
62 to 75 N.m
Forward 0 - 5.50 km/h
Reverse 0 - 2.73 km/h
www.trapp.com.br
54G26G60X8A - 26 hp
54" (1371 mm)
15. 14 liters
Forward 0 - 8.20 km/h
Reverse 0 - 2.60 km/h