Tabla de contenido
Idiomas disponibles
Idiomas disponibles
68
How to Wash Your Motorcycle
ATTENTION
Never wash the motorcycle in direct sunlight or with
the engine warm.
1. Spray kerosene on the engine, exhaust, wheels and
side stand. Use a brush to remove oil and grease
residues. Asphalt can be removed with pure
kerosene.
2. Then rinse with plenty of water.
3. Wash the fuel tank, seat, side covers and fenders
with water and neutral shampoo. Use a soft cloth or
sponge. Rinse and dry the motorcycle completely
with a clean and soft cloth. Remove the infiltrated
water excess from the inside of the control cables.
ATTENTION
High-pressure water or air can damage certain parts
of the motorcycle.
Avoid spraying high-pressure water or air at the
following:
– Wheel hubs
– Muffler outlets
– Under the seat
– Ignition switch
– Handlebar switches
– Drive chain
– Under the fuel tank
– Instruments
– Carburetor
– Steering head
– Steering head bearings
• Clean plastic parts with a soft cloth or sponge
dampened with a neutral detergent and water
solution. Rinse with plenty of clean water and dry
with a soft cloth.
• Do not use a dry cloth to remove the dust, or the
paint will be scratched.
4. If necessary, apply protective wax to painted or
chromed surfaces. Apply it with a special cotton or
flannel cloth, through circular and uniform strokes.
Owner's Manual
Capítulos
Tabla de contenido
