Honda NXR125 BROS KS Manual Del Propietário página 125

46
ATTENTION
• • • • • The engine oil is the element that most affects
engine performance and service life.
• • • • • Non-detergent, vegetable oils or racing lubricants
are not recommended.
• • • • • The use of a different oil from that specified may
damage the engine due to carbonization. Under this
circumstance, Honda Limited Warranty will be
voided.
• • • • • For proper engine lubrication, it is essential to use
a high quality oil.
Engine Oil and Oil Strainer
Change the engine oil as specified in the Maintenance
Schedule on page 40. When running in very dusty
conditions, oil change and oil strainer cleaning should
be performed more frequently than specified in the
Maintenance Schedule.
NOTE
Change the oil with the engine at normal operating
temperature and the motorcycle on its side stand to
assure a complete and rapid draining.

WARNING
The engine and oil become hot during operation, and
they remain hot for a while after stopping the
engine. Be careful not to burn yourself.
(3)
(4)
(5)
(2)
(1)
1. Remove the oil dipstick from the right crankcase
cover. Place a suitable container under the engine
to collect the oil and remove the oil strainer plug (1).
The spring (2) and oil strainer screen (3) will come
off when the plug is removed.
2. Operate the kickstarter pedal or starter button
several times to drain the remaining oil.
3. Wash the screen in clean non-flammable solvent.
4. Make sure the grommet (4) and O-ring (5) is in good
condition. Replace if necessary. Install the screen,
spring and oil strainer plug.
Oil strainer plug
Torque: 15 N.m (1.5 kgf.m; 11 lbf.ft)
5. Fill the crankcase with approximately 0.9 l
(0.23 US gal; 0.20 Imp. gal) of the recommended
oil.
6. Install the oil filler cap/dipstick. Check for leak.
Owner's Manual
(1) Oil strainer plug
(2) Spring
(3) Oil strainer screen
(4) Grommet
(5) O-ring