Tabla de contenido
Idiomas disponibles
Idiomas disponibles
54
Front and Rear Suspensions
(Refer to "Maintenance Precautions" on page 42.)
1. Check the fork assembly by applying the front brake
and pumping the fork up and down vigorously.
Suspension action should be progressive and
smooth.
2. Check for oil leakage. Make sure all front
suspension, handlebar and instrument panel
fasteners are correctly tightened.
3. Check the rear suspension periodically and the
swingarm bushing with the motorcycle supported on
a stand. Push hard against the side of the rear
wheel to check the bearings and bushing for play, or
if the shock link is loose. Make sure the rear shock
absorber has no oil leakage. Push the rear
suspension down to check if the system linkages
have excessive play or wear.
4. Check all suspension fasteners. Make sure they are
in perfect condition and correctly tightened.
WARNING
Suspension components directly affect motorcycle
safety. If any component shows wear, excessive
play, or if it is damaged, see your authorized Honda
dealer that is qualified to perform all maintenance
and repair services. Otherwise motorcycle stability
and driveability will be seriously affected.
Side Stand
(Refer to "Maintenance Precautions" on page 42.)
Check the side stand spring (1) for damage and loss
of tension, and the side stand assembly for freedom of
movement and bending. If the side stand is squeaky or
stiff, clean the pivot area and lubricate the pivot bolt
with clean engine oil.
(1)
Owner's Manual
(1) Side stand spring
Capítulos
Tabla de contenido
