G
ENERAL USE
Key lock – KEY LOCK
Insert disc
Sound settings
GB-16
While the unit is switched on, press the button KEY LOCK . The
following appears in the display KEY LOCK. All buttons on the remote
control and on the unit, except the POWER button, are now locked.
Press KEY LOCK again, to remove the button lock once more. The
following appears in the display LOCK off.
Make sure that there is about 15 cm (6") space, so that the disc tray is not
impeded when it is ejected.
In Standby mode press the OPEN/CLOSE button twice, when switched
on, press OPEN/CLOSE once. In the display appears OPEN; on the screen
O P E N
.
Insert a disc with writing upwards into the disc tray. Ensure that the disc
is centred correctly in the tray, so that it does not jam when the tray
closes.
Press the button OPEN/CLOSE . The disc tray closes. The following
appears in the display: Close (on the screen: C L O S E ) and after a few
seconds Loading (Screen: L O A D I N G ).
While playing, the LED-display for Standby mode is unlit.
Volume - VOLUME
Press VOLUME
, to raise the volume.
Press VOLUME
, to lower the volume.
On the unit, turn the wheel JOG VOLUME to the right or left, to raise or
lower the volume respectively.
In the display: the volume is shown in a scale from 0 (MIN) to 80 (MAX).
If you have switched off the unit via the POWER button, the volume is set
to a value of 30.
MUTE
Press MUTE to switch off the sound completely. In the display MUTE ON
appears briefly.
Press MUTE again to switch the sound on again. In the display MUTE OFF.
appears briefly.
Please note that muting also stays active, even when you change
the volume and the volume change is shown in the display.
BASS
To strengthen the bass tone, press BASS . In the display BASS ON appears
briefly.
Press BASS again to switch off the bass strengthening. In the display
BASS OFF appears briefly