DENTSPLY Esthet X HD Manual Del Usario página 16

Complete System
Enhance
PoGo
®
Polishing Systems
The Enhance ® Finishers (Discs, Cups and Points) are pre-mounted single use aluminum oxide
impregnated cured urethane dimethacrylate resin finishers designed for preparing composite
surfaces for their final polish. PoGo ® Polishers (Discs, Cups and Points) are pre-mounted,
single-use diamond impregnated cured urethane dimethacrylate resin polishing devices
designed for use in the final polishing of all accessible composite resin restorations. When
used as directed, the Enhance ® Finishing and PoGo
luster on hybrid composites such as Esthet•X
and Prisma ® AP.H ® Composites, SureFil
composite restoratives. The Enhance ®
in final polishing of compomer and flowable composite such as Esthet•X
restoratives such as Dyract ® AP and Dyract
Caution: U.S. Federal law restricts this device to sale by or on the order of a dentist.
INDICATIONS
1. Enhance ® Finishing Discs, Cups and Points are indicated for contouring and finalizing the
form of composite and compomer restorations.
2. PoGo ® Polishing Discs, Cups and Points are indicated as the final step in polishing all
properly contoured and finished
composite resin and compomer restorations.
COMPOSITION
Enhance ® :
Polymerized Urethane Dimethacrylate Resin; Aluminum Oxide; Silicon Oxide; Plastic latch-type
mandrel
PoGo ® :
Polymerized Urethane Dimethacrylate Resin; Fine Diamond Powder; Silicon Oxide; Plastic
Latch-type mandrel
CONTRAINDICATIONS
Do not reuse. Enhance ® Finishers & PoGo
disposable item. Attempts to sterilize and/or reuse these items can adversely affect their
performance. Enhance ® FINISHERS & PoGo
SPEED HANDPIECES.
WARNINGS
1. Enhance ® Finishing Discs, Cups, Points and PoGo
designed for use without water. As with any rotary instrument, heat will build up with
prolonged contact. Use with light intermittent pressure. Application of an air cooling stream
during finishing and polishing assists with residue removal.
2. Use of the Enhance ® Finishers and PoGo
dislodge finisher and/or polisher from the mandrel or cause quick deterioration and
decreased effectiveness. This type of excess pressure may cause goughing of the
restoration surfaces.
3. Care should be taken to have good control on any rotary instrument to protect patients from
injury. Contact with soft tissues (gingiva, mucosa) may result in injury to the tissue. If contact
occurs, thoroughly wash the affected area with water and seek appropriate medical attention.
PRECAUTIONS
1. This product is intended to be used as specifically outlined in the Directions for Use. Any
use of this product inconsistent with the Directions for Use is at the discretion and sole
responsibility of the practitioner.
2. Use in a well ventilated area. Avoid inhaling airborne particulates.
3. Protect adjacent restorations from accidental contact.
4. Storage & Shelf Life: "Dry Storage is Recommended". Store the Enhance
PoGo ® Polishing System between 65°F-80°F (18°C-25°C) and in relative humidity of 50% ±
20%. Avoid direct sunlight. Do not use after expiry date.
®
Finishing &
® Polishing System will yield a high surface
® Micro Matrix, TPH ® Spectrum
® High Density Restorative Material and microfilled
Finishing & PoGo ® Polishing Systems are also effective
® flow and compomer
® flow.
® Polishers are indicated as a single use only,
® POLISHER SOULD NOT BE USED IN HIGH-
® Polishing Disc, Cups and Points are
® Polishers with excessive lateral pressure may
®
ADVERSE REACTIONS
Allergic contact dermatitis and other allergic reactions may occur in susceptible individuals.
STEP BY STEP INSTRUCTION FOR USE
STEP 1: Place restoration or composite veneer as per standard techniques. Complete gross
reduction of excess and general outline form of the restoration using carbide finishing
® , Prisma ® TPH ® ,
burs (i.e. Prisma
STEP 2: Insert an Enhance
angled handpiece and continue finishing. NOTE: ENHANCE
POINTS MUST NOT BE USED IN HIGH SPEED HANDPIECES. The aggressiveness of
the Enhance
composite. The greater the pressure, the more material is removed; lighter pressure
leaves a smooth surface without removing bulk.
Technique Tip:
1. Prior to proceeding to the PoGo
a final contour. Surface should be smooth and defect free.
2. Enhance ® Finishing Points and PoGo
concave lingual surfaces.
3. Enhance ® Finishing Cups and PoGo
line angle areas.
STEP 3: Insert a PoGo
handpiece. NOTE: PoGo
HANDPIECES. Begin polishing by applying light intermittent pressure at moderate
speed to the restoration surface. When using the disc, the flat broad surface of the
PoGo
effectiveness. To increase surface luster, decrease the pressure applied to the
restoration surface using a light buffing motion
Technique Tip: The flexibility of PoGo
angles without alteration of form.
STERILIZATION AND MAINTENANCE
Do not attempt to sterilize and/or reuse the Enhance
cup or point.) Properly dispose after use.
LOT NUMBER AND EXPIRATION DATE
1. Do not use after expiration date. ISO standard used: "YYYY/MM"
2. The following numbers should be quoted in all correspondences.
• Reorder number
• Lot number on package
• Expiration date on package
Finishing and the
® Finishing Burs), diamond finishing burs,etc.
® Finisher (Disc, Cup or Point) into a conventional speed contra-
® Finishers is controlled by the pressure applied to the surface of the
® Polishing System restoration surface should be finished to
® Polishing Points are ideal for posterior occlusal and
® Polishing Cups are well suited for cervical and proximal
® Polishing Disc, Cup or Point into a conventional speed contra-angled
® POLISHERS MUST NOT BE USED IN HIGH SPEED
® Polisher should be used in contact with the restoration to optimize its
® , when used lightly, allows polishing of established line
Manufactured by: Distributed by:
DENTSPLY Caulk DENTSPLY Canada
38 West Clarke Avenue 161 Vinyl Court
Milford, DE 19963 USA Woodbridge, Ontario
Tel.: 1-302-422-4511 L4L 4A3 Canada
www.dentsply.com
® DISCS, CUPS AND
® Finishers and/or PoGo ® Polishers (disc,
DENTSPLY D T GmbH
E REY
De-Trey-Str. 1
78467 Konstanz
Germany
Tel.: 49-7531-583-0
www.dentsply.de
Form #562031 (1/10/03)