SPECIFICATIONS
Product name
External dimensions
Internal dimensions
Interior volume
Exterior
Interior
Outer door
Inner door
Trays
Access port
Insulation
Heating system
Heater
Humidifying system
Temperature controller
Temperature display
CO
controller
2
CO
density display
2
Air circulation
Gas line filter
Alarms
Remote alarm contacts
CO
inlet connection
2
CO
inlet pressure
2
Weight
Accessories
*1: It is recommended to use standard signal and interface cables with a maximum length of 30 meters.
W 480 mm x D 550 mm x H 585 mm (W 18.9 in. x D 21.7 in. x H 23.0 in.)
W 370 mm x D 363 mm x H 385 mm (W 14.6 in. x D 14.3 in. x H 15.2 in.)
Painted steel (Back cover has no paint)
2 trays made of stainless steel containing copper
W 353 mm x D 308 mm x H 12 mm (W 13.9 in. x D 12.1 in. x H 0.47 in.)
Inner diameter: 30 mm (1.18 in.); on the back side
DHA system (heater jacket + air jacket system)
Natural evaporation with humidifying pan
0.01 m, Efficiency: 99.99 % or higher
Temperature alarm, CO
High-limit temperature alarm, CO
Allowable contact capacity: DC 30 V, 2 A
Soft Polyurethane tube can be connected.
(ID 4 mm, OD 6 mm (ID 0.157 in. ,OD 0.236 in.))
0.03 MPa(G)–0.1 MPa(G) (0.3 kgf/cm
1 power supply cord cover plate, 2 trays, 1 gas tube,
1 humidifying pan, 1 conversion Joint
1 removable power supply cord for UK,
1 removable power supply cord for EU countries
CO
Incubator MCO-50AIC
2
50 L (1.77 cu.ft.)
Stainless steel containing copper
Painted steel
Tempered glass
Maximum load: 7 kg (15 lbs.)/tray
Styrene AcryloNitrile copolymer
165 W
PID control system
Digital display
PID control system
Digital display
Fan-assisted
density alarm,
2
gas alarm, heater alarm, fan stop alarm
2
2
(G)–1 kgf/cm
45 kg (99 lbs.)
*1
2
(G), 4.4 psi(G)–14.5 psi(G))
85