Specifications - Phcbi MCO-230AIC Instrucciones De Operación

SPECIFICATIONS

Product name
Medical purpose
External dimensions
Internal dimensions
Interior volume
Exterior
Interior
Outer door
Inner door
Trays
Access port
Insulation
Heating system
Heater
Humidifying system
Temperature controller
Temperature display
CO controller
2
CO density display
2
Air circulation
Air filter
UV lamp
Alarms
Remote alarm contacts
CO inlet connection
2
CO inlet pressure
2
Weight
Accessories
CO Incubator
2
MCO-230AIC
Culture of cell tissues, organs, embryos.
W 770 mm x D 730 mm x H 905 mm (W 30.3 in. x D 28.7 in. x H 35.6 in.)
W 643 mm x D 523 mm x H 700 mm (W 25.3 in. x D 20.6 in. x H 27.6 in.)
Painted steel (Rear cover has no paint)
4 trays made of stainless steel containing copper
W 620 mm x D 450 mm x H 12 mm (W 24.4 in. x D 17.7 in. x H 0.47 in.)
Inner diameter: 30 mm (1.18 in.); on the back side
DHA system (heater jacket + air jacket system)
Natural evaporation with humidifying pan
0.3 m, Efficiency: 99.97 % or higher
-----
Automatic set temperature alarm, Automatic set CO
High limit temperature alarm, CO
Allowable contact capacity: DC 30 V, 2 A
4 mm to 6 mm (0.157 in. to 0.236 in.) diameter tube can be connected
0.03 MPa(G)–0.1 MPa(G) (0.3 kgf/cm
1 power supply cord cover plate, 4 trays, 1 gas tube, 1 humidifying pan, 2 tube bands
1 removable power supply cord for UK
1 removable power supply cord for EU countries other than UK
230L (8.12 cu.ft.)
Stainless steel containing copper
Painted steel
Tempered glass
Maximum load: 7 kg/tray
Styrene AcryloNitrile copolymer
345 W
PID control system
Digital display
PID control system
Digital display
Fan-assisted
4 W x 1 (ozone-free emission)
gas, various sensor/heater alarms
2
2
(G)–1 kgf/cm
90 kg
CO Incubator
2
MCO-230AICUV
density alarm,
2
2
(G), 4.4 psi(G)–14.5 psi(G))
69