Phcbi MCO-50AIC Instrucciones De Operación página 38

OPERATION/ALARM LOG
<When exporting data to USB flash drive>
The operation history record of the selected date is exported as a CSV
file.
10. With the date display highlighted in the graph [Fig. 9], press the right
key (▷).
▶ The EXP. in the upper right of the display is highlighted [Fig. 10].
11. Insert the USB flash drive into the USB port.
Note: USB flash drives with capacity of 32 GB or less that employ the
FAT16/FAT32 file system are supported. USB flash drives that require
passwords cannot be used. Do not insert devices other than USB flash
drives into the USB port.
12. Press the enter key (ENTER). The data will be exported.
▶ While the data is being exported, "Exporting" is displayed on the right
side of the display [Fig. 11].
13. When export is complete, "Export complete" is displayed [Fig. 12].
Press any key to return to the graph display screen.
Note: Even after the export of operation log data is complete, operation
log data saved in the incubator are not deleted.
*The following messages may come up on the right side of the display:
(See page 45 for details)
"USB flash drive is disconnected": USB flash drive is not inserted
"USB flash drive is full": there is no available space in the USB flash drive
"An error occurred": failed to export to USB flash drive
"No Data": there is no data to export
▶ Press any key on the control panel to return to the graph display
screen.
14. Remove the USB flash drive from the USB port.
15. Press the menu key (MENU/HOME) to display the home screen.
The display returns to the home screen automatically when 90
seconds has passed without any key operation.
38
Temp 01/Jan/19
50°C
－
‐
40°C －
‐
30°C
－
0 12
<Right side of the display>
Temp 01/Jan/19
50°C
－
‐
40°C
－
‐
30°C
－
0 12
<Right side of the display>
Exporting
<Right side of the display>
Export complete
<Right side of the display>
EXP.
24
[Fig. 9]
EXP.
24
[Fig. 10]
[Fig. 11]
[Fig. 12]