Removing Inner Attachments - Phcbi MCO-50AIC Instrucciones De Operación

BEFORE STARTING OPERATION

Removing inner attachments

Remove the inner attachments through the following procedure.
Be careful not to damage the UV lamp in the duct (When an optional UV system set MCO-170UVS is
installed).
1. Turn OFF the power to the incubator.
2. Open the outer and inner doors and pull out all
the trays.
Tray
3. Pull out the humidifying pan.
Humidifying pan
4. Lift up the fan cover and pull forward to remove
it.
22
Fan cover
Duct
5. Lift the duct and remove it from the inner pins.
Duct
6. Pull out the fan.
7. Remove the silicon caps for the access port
from inside and back side of the unit.
[Back side]
[Inside]
Silicon cap