Setting Date - Phcbi MCO-50AIC Instrucciones De Operación

OTHER PARAMETERS

Setting date

The date setting can be changed as follows.
1. On the home screen, press the menu key (MENU/HOME).
▶ The left side of the display changes to the Menu screen.
2. On the Menu screen, move the cursor to Alarms & Controls [Fig. 1]
using the up/down keys (△▽), and press the enter key (ENTER).
▶ The display changes to the Alarms & Controls screen.
3. On the Alarms & Controls screen, move the cursor to Date & Time
[Fig. 2] using the up/down keys (△▽), and press the enter key
(ENTER).
▶ The display changes to the Date & Time screen.
4. On the Date & Time screen, move the cursor to Date
[Fig. 3] using the up/down keys (△▽), and press the enter key
(ENTER).
▶ The right side of the display changes to the Date screen, and the
current date (Year/Month/Date) is displayed [Fig. 4].
5. Move the cursor using the left/right keys (◁▷) and select the digit you
want to change, and then use the up/down keys (△▽) to change the
number.
Even when the date display format is DD/MM/YY, the numerical values
can be changed in the same way.
6. Press the enter key (ENTER).
▶ The input is confirmed and the display returns to the Date & Time
screen.
*When the entered date is out of the settable range, the following
message is displayed on the right side of the display. Press any key on
the control panel to change to the Date screen [Fig. 4].
7. Press the menu key (MENU/HOME) to display the home screen.
The display returns to the home screen automatically when 90 seconds has passed without any key
operation.
Date
Invalid Value
Press Any Key
YY/MM/DD
<Right side of the display>
Menu
Set Value
Data Log
Lock
Alarms & Controls
<Left side of the display>
Alarms & Controls
Temp/Gas Alarm Set
Other Alarm Set
UV Setting
Gas Supply Setting
Date & Time
Keypad Click Set
<Left side of the display>
Date & Time
Date Format
Date
Time
<Left side of the display>
Date
19/01/01
YY/MM/DD
<Right side of the display>
[Fig. 1]
▼
[Fig. 2]
[Fig. 3]
[Fig. 4]
71