Setting Unique Id - Phcbi MCO-50AIC Instrucciones De Operación

OPERATION/ALARM LOG

Setting Unique ID

You can set the unique device ID that will be a part of the file name (CSV file) exported to the USB flash
drive.
 Setting values: 6 digits of alphanumeric characters (capital letters only if using letters)
 Factory setting: 000000
1. On the home screen, press the menu key (MENU/HOME).
▶ The left side of the display changes to the Menu screen.
2. On the Menu screen, move the cursor to Data Log [Fig. 1] using the
up/down keys (△▽), and press the enter key (ENTER).
▶ The display changes to the Data Log screen.
3. On the Data Log screen, move the cursor to Data Log Setting [Fig. 2]
using the up/down keys (△▽), and press the enter key (ENTER).
▶ The display changes to the Data Log Setting screen.
4. On the Data Log Setting screen, move the cursor to Unique File ID
[Fig. 3] using the up/down keys (△▽), and press the enter key
(ENTER).
▶ The right side of the display changes to the Unique File ID screen
[Fig. 4].
5. Move the cursor using the left/right keys (◁▷) and select the digit you
want to change, and then use the up/down keys (△▽) to change the
number.
6. Press the enter key (ENTER).
▶ The value is confirmed and the display returns to the Data Log Setting
screen.
7. Press the menu key (MENU/HOME) to display the home screen.
The display returns to the home screen automatically when 90
seconds has passed without any key operation.
42
Menu
Set Value
Data Log
Lock
Alarms & Controls
<Left side of the display>
Data Log
Data Log Chart
Data Log Export
Data Log Setting
Alarm
Alarm Export
<Left side of the display>
Data Log Setting
Data Log Interval
Unique File ID
<Left side of the display>
Unique File ID
000000
<Right side of the display>
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]