Phcbi MCO-50AIC Instrucciones De Operación página 45

OPERATION/ALARM LOG
8. When the export is complete, "Export complete" is displayed [Fig. 6].
Press any key to return to the Alarm Export screen.
Note: The alarm log data saved in the incubator is not deleted even after
the completion of the export.
*The following messages may appear on the right side of the display:
USB flash drive is not inserted into the USB port.
•
USB flash drive is not inserted properly.
•
Solution: Press any key, and then insert a USB flash
drive properly into the USB port.
The specified log data does not exist. •
Solution: Press any key, and then specify the data
again.
▶ Press any key on the control panel to return to the Alarm Export screen.
9. Remove the USB flash drive from the USB port.
Reference: "log" folder is created in the USB flash drive and the export file is saved in the folder in CSV format.
The export file name consists of the device ID, date of export, and data name. The date format can be changed
in the settings (see page 70).
(Example) When the device is set to "A00001" and data during Jan. 1, 2019 to Apr. 1, 2019 is exported
with "All" selected:
The oldest alarm log
date - current date
(Example) When the device is set to "A00001" and the data on Jan. 1, 2019 is exported with "24 Hours"
selected:
Specified date
*If the device ID is not set, the default setting "000000" is used.
*If duplicated file names are used, the data exported later will be overwritten.
10. Press the menu key (MENU/HOME) to display the home screen.
The display returns to the home screen automatically when 90 seconds has passed without any key
operation.
USB memory is
disconnected
No Data
YY/MM/DD
A00001_20190101-20190401_AlarmLog.csv
YY/MM/DD
A00001_20190101_AlarmLog.csv
<Right side of the display>
There is not enough free space in the USB flash drive.
•
The USB flash drive is not formatted in FAT16 or
•
FAT32 format.
Solution: Press any key, and then check the capacity
and format type of the USB flash drive.
USB memory is
The export operation was unsuccessful. •
Solution: Press any key, and then specify the data
again.
An error occurred
A00001_01Jan2019-01Apr2019_AlarmLog.csv
A00001_01Jan2019_AlarmLog.csv
Export complete
full
DD/MM/YY
DD/MM/YY
[Fig. 6]
45