Tabla de contenido
Idiomas disponibles
Idiomas disponibles
H
O
DECONTAMINATION (OPTION)
2
2
8. Set the humidifying pan removed in step 1 by
leaning it against the flange of the duct. Set the trays
on the first and third tray catches from the top (Fig. 3).
Note: H
O
decontamination function decontaminates
2
2
the chamber and inner attachments. Do not place
anything other than the designated inner attachments
into the chamber during decontamination.
9. Make sure the duct, chamber fan, and H
door and outer door, referring Figures 1 - 3 on page 84.
10. Press and hold the H
(H
O
) while the Home screen is
2
2
displayed.
▶ The display switches to the H
Decontamination screen [Fig. 4].
Make sure the H
O
2
H
O
generator are properly set.
2
2
11. Press the up/down keys (△▽) to
change the setting to YES.
The setting toggles between YES
and NO each time the up/down keys
are pressed.
12. Press the Enter key (ENTER).
▶ The message indicating the
system check execution is displayed
on the left side of the display [Fig. 5]
while the system check is performed.
13. When the system check has
completed successfully, H
decontamination starts, and then
Step 1 to Step 3 are sequentially
displayed.
Step 1: Preparing for H
decontamination [Fig. 6]
In this process, the chamber is
heated to 48 °C.
Step 2: H
O
decontamination [Fig. 7]
2
2
In this process, H
2
generated from the H
decontaminate the chamber by H
Step 3: UV resolve [Fig. 8]
This process breaks down the H
vapor through UV irradiation.
O
key
2
2
O
2
2
reagent/
2
<Left side of the display>
H
<Left side of the display>
H
Door : Look
O
2
2
<Left side of the display>
H
O
Door : Look
2
2
<Left side of the display>
O
vapor is
2
H
O
generator to
2
2
O
.
2
2
Door : Look
O
2
2
<Left side of the display>
O
generator are attached correctly, and then close the inner
2
2
H
O
Decontamination
2
2
1. Pour the H
O
2
2
reagent into the
H
O
generator.
2
2
2.Set the H
O
2
2
generator.
O
Decontamination
2
2
H
O
Decon
2
2
System Check...
O
Decontamination
2
2
Step 1
Step 2
UV : OFF
Step 3
O
Decontamination
2
2
Step 1
Step 2
UV : OFF
Step 3
O
Decontamination
2
2
Step 1
Step 2
UV : ON
Step 3
Humidifying
pan
Duct flange
NO
YES / NO
<Right side of the display>
<Right side of the display>
Step 1 : Warm Up
48.0
°C
<Right side of the display>
Step 2 : H
O
Decon
2
2
60
min
<Right side of the display>
Step 3 : UV Resolve
90
min
<Right side of the display>
H
O
2
2
generator
Fig. 3
[Fig. 4]
[Fig. 5]
[Fig. 6]
[Fig. 7]
[Fig. 8]
75
Capítulos
Tabla de contenido
Solución de problemas
