Removing Inner Attachments - Phcbi MCO-170M Instrucciones De Operación

Removing inner attachments

Always replace the inner attachments after cleaning to maintain efficient performance.
Be careful not to damage the UV lamp in the duct (When an optional UV system set MCO-170UVS is
installed).
1. Turn OFF the power to the incubator.
2. Open the outer and inner doors and pull out all
the trays (Fig. 1).
Note: Open the inner door after closing all the
gastight split doors.
3. Pull out the humidifying pan cover (Fig. 2).
4. Pull out the N /O gas injection nozzle and N
2 2
gas injection nozzle tube (Fig. 3).
Humidifying pan cover
/O
2 2
Gas injection nozzle tube
Tray
Fig. 1
Fig. 2
Gas injection nozzle
Fig. 3
25