Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Maintenance
6.3- How to adjust the knives to the rotor counter knife
The correct adjustment of the knives with
the counter knife ensures greater operating
efficiency, better cut quality, less tractor power
and reduced fuel consumption. Should take a
maximum gap of 0.5 mm between knife and
counter knife for best machine performance.
Check the clearance after each sharpening
and adjust as necessary, proceeding as
follows.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Remove the bolts (A) and (B);
1.
Remove the sharpener cover (C);
2.
Remove the four bolts (D) and (E);
3.
Using a socket or an allen key, loosen the
4.
bolt (H);
NOTE!
To facilitate the access to the bolt (H),
remove the knife that is in the direction
of the bolt.
82
A
D
Instructions Manual
C
B
F
F
H
E
G
Capítulos
Tabla de contenido
