4- Rotating The Outlet Chute; 5- Moving The Deflector - Nogueira FTN-1600 Manual De Instrucciones

4. Preparation

4.7.4- Rotating the outlet chute

The turning movement of the outlet chute
is performed by a worm drive, driven by a
hydraulic motor. This feature allows you to
position the chute for the discharge in the
desired direction.
To rotate the outlet chute:
Press and hold the 'TURN THE CHUTE'
1.
button on the Joystick (see the figure
beside).
Move the tractor hydraulic control lever.
2.
NOTE!
The side to which the lever is moved
(forward or backward) determines the
direction of chute rotation. Take a test
and observe.

4.7.5- Moving the deflector

The hydraulic cylinder (A) moves the deflector
(B). To direct the jet of chopped crop, adjust
the deflector using the Joystick.
To adjust the deflector:
Press and hold the 'MOVE THE DEFLECTOR'
1.
button on the Joystick (see the figure at
the side).
Move the tractor hydraulic control lever.
2.
NOTE!
The side to which the lever is moved
(forward or backward) determines
whether the deflector will rise or fall.
Take a test and observe.
54
Instructions Manual
TO TURN
THE CHUTE
JOYSTICK
A
MOVING THE
DEFLECTOR:
JOYSTICK
B