4. Preparation
4.4- Leveling
Cross Level
Lift the machine about 20 cm from the
ground.
By looking from the tractor rear-end, check
if the machine is parallel with the ground.
Lower the machine and make the necessary
adjustments.
Longitudinal Level
Looking at the machine on its side, check that
it is level. Make the corrections by adjusting
the arm length of the third point of the
hydraulic lift.
When maneuvering with the machine
coupled in the tractor, check if there is
enough space to carry out the movements
and if there are no people or animals near
the machine.
46
ATTENTION!
Instructions Manual