Clearance; 1- Clearance Opening - Nogueira FTN-1600 Manual De Instrucciones

2.8- Clearance

It is important to plan ahead the clearances,
leaving the necessary gaps in order to allow the
harvester to enter the harvesting area.

2.8.1- Clearance opening

The harvester has an articulation system of the
coupling arm to the tractor that allows the
coupling in the rear position (figure beside).
Always use the rear position for opening the
clearance.
We remind you that the harvester has not
been developed and it is not appropriate
to be manually fed. This procedure exposes
high accident risks to people who are
involved. To open the clearance, it must
be used in the rear position of the tractor.
If manual feeding is required, use one of
the silage machines from the Nogueira
stationary line, such as the EN-6800.
IT IS FORBIDDEN TO MANUALLY
FEED THE HARVESTER.
It is the producer (customer) sole responsibility
to plan the planting, so that the right spacing
for the harvest is respected.
Nogueira Máquinas will not be held
responsible for the inadequate use of its
equipment. The harvester must be used only
with accordance with this Manual, any other
procedure must be avoided.
ATTENTION!
Instructions Manual
Use a chopper whenever it is
necessary to manually feed.
Never attempt to manually feed
the harvester.
2. Safety
15