Redmond RMK-M451E Manual Del Usuario página 12

VII. TROUBLESHOOTING
Problem Possible causes
Error message
System failure, possible control board or heating
is displayed on the
element failure
screen: Е1 – Е4
Power cord is not connected to the appliance and
(or) to the outlet
The appliance does
not switch on Faulty electrical outlet
Power supply failure
Power supply interruption (voltage level is unstable
or below the standard)
There is a foreign object or particles between the
The meal is taking
bowl and the heating element.(litter, grain, pieces
too long to cook
of food)
The bowl is installed with the distortion
Heating element is dirty
The bowl is improperly in-
stalled into the housing
The steam comes The tightness of con- The lid is loosely closed
off from under the nection between the or there is a foreign object
lid during cooking bowl and inner lid is under it
process broken.
Sealing rubber on the inner
lid is dirty, deformed
or damaged
In case you didn't manage to eliminate the defects, please, refer to the authorized service centre.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling of
electrical and electronic equipment. Do not throw away the electronic waste to help protect the environment.
Old appliances must not be disposed with other household waste but must be collected separately. Municipal dis-
posal of recyclable wastes is free of charge. The owners of old appliances are required to bring it to a waste facility
centre. With this little extra effort, you can help to ensure that valuable raw materials are recycled and pollutants are treated as
appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU – concerning used electrical and electronic appli-
ances (waste electrical and electronic equipment WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
12
Solution
Unplug the appliance and let it cool down. Close the
lid until tight, plug in the appliance
Ensure that the removable power cord is connected
to the corresponding socket on the appliance and
plugged in
Plug in the appliance to the working outlet
Check the voltage supply. In case of its failure, con-
tact an authorized organization.
Check the stable voltage supply. If it is unstable
or below the standard, contact an authorized orga-
nization.
Unplug the appliance and let it cool down. Remove
the foreign object or particles.
Install the bowl properly
Unplug the appliance and let it cool down. Clean the
heating element.
Install the bowl properly
Check for any foreign objects (litter, grain, pieces
of food) between the lid and the housing, remove
them. Always close the appliance lid until it clicks
into place.
Check the condition of the sealing rubber on the
inner lid. Probably it needs to be replaced.