Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating manual - English
5.7
M
AINTENANCE
All the steps necessary for maintenance are described below.
5.7.1
Cutters
Select the function from the main menu by placing the cursor on "4 - Maintenance.
Press ENTER, the display will show:
The menu item "CUTTERS" includes the tool used by TRI-CODE with its characteristics.
Use the [ENTER] key to go to the item "1 - Cutters" or press the "1" key to view the tool used by the
machine.
Fig. 43
Press ENTER, the display will show:
Move with the arrow keys or [ENTER] onto the field to be altered and press [SHIFT]+
key] to alter the value from those admissible:
Material
Life
* Duration
Length
B. Cutting
Attention: use cutters provided by SILCA.
* D
URATION
LOW
STANDARD
HIGH
CUSTOM 3X = STANDARD x 3
CUSTOM 4X = STANDARD x 4
- 4
1 - C u t t e r
2 - T e s t
3 - C u t t i n g T e s t
C u t t e r
1 : H 1 0 1
C u t t e r : 1 0 1
L i f e = [ X X X X X X X X X X ] %
D u r a t i o n = S T A N D A R D
L e n g . : 4 0 0 0
The user can select H = HSS or W = Hard Metal, according to the material of the cutter to be used.
Cutter H101 = Standard
Shows the life of a (new) cutter with 10 black squares. The fewer the black squares the more worn
the cutter is (this characteristic of the cutter cannot be modified)
Select: LOW / STANDARD / HIGH / CUSTOM 3X / CUSTOM 4X
A STANDARD value is normally established
Cutter length 40 (unalterable characteristic of the cutter)
The cutter cutting base (unalterable characteristic of the cutter)
:
Copyright Silca 2006
M a t . = H
B a s e : 2 5 0
TRI-CODE H.S.
[down arrow
47
Capítulos
Tabla de contenido
