Silca Tri-Code Manual De Uso página 22

Operating manual - English
• Clamp POSITION C
Fig. 21
STOP 0
Turn the (F) knob to the left. Fit the key so that it lies flat on the clamp with the key stop up against Stop 0.
Secure the key by turning the (F) knob to the right.
Fig. 22
Attention: to ensure effective operation, keep the clamp detector pins and clamp jaws free of any swarf at all
times, using the brush provided or a clean cloth.
Attention: when closing the clamp do not apply excessive pressure to the knob. To secure the key properly,
simply turn the knob about 45° (clockwise or anticlockwise, according to needs) when the key is
gripped (fig. 23). Take care to hold the key down properly when closing the clamp to avoid buckling,
bad alignment or lack of support for the entire surface.
Fig. 23
max 45°
Copyright Silca 2006
TRI-CODE H.S.
F
F
17