Equipotential Connection; Inverting The Belt Rotation Direction - OEM TL 105 Manual De Uso

TL 105 - TL 108
Installation and connections
3.3.b - Equipotential connection (Fig. 6)
The oven must be inserted in an equipotential system
whose efficiency must be checked according to the
regulations in force.
• Remove the cover (1) by undoing the screws (2).
• The connection must be made in cascade between
the various oven components using the screw (3).
3.4 - I N V E R T I N G T H E B E LT R O TAT I O N
DIRECTION (Fig. 7)
Belt rotation is set so that the product infeed is on the
control panel side and the outfeed on the opposite side.
• Turn on the oven: if the symbol (1) appears on the
display, the electrical connection is incorrect and the
oven will not work.
• Invert two of the three phase wires on the terminal
board (2).
DANGER
Before inverting two of the three phase
wires, make sure that the LINE DISCON-
NECTING SWITCH is disconnected (line
not powered).
FIG. 6
3
FIG. 7
L3 L2 L1 N
L3-L2-L1
1
2
OK
NO
2
1
EN - 15