Raising And Lowering - Jungheinrich ETR 314 Manual De Instrucciones

3.6

Raising and lowering

Qw W
Persons must not stand under the lifted load.
– (t) Tilt Multi-Pilot (5) in the (H) direction to
lift.
– (t) Tilt Multi-Pilot (5) in the (S)
direction to lower.
– (o)1 Turn function switch (19) in the (H)
direction to lift.
– (o)1 Turn function switch (19) in the (S)
direction to lower.
– (o)2 Tilt Multi-Pilot (5) in direction (H) to
raise.
– (o)2 or tilt Multi-Pilot (5) in direction (S) to
lower.
NOTICE The tilt of theMulti-Pilot (5) or the function switchs (19) controls the lift and
lowering speed.
– Operate Multi-Pilot (5) or the function switchs (19) until the desired lift height is
reached.
NOTICE If the end stop is reached (sound of the pressure limit valve), immediately
return joystick to basic position.
IMPORTANT Avoid setting the load unit down hard to protect the load and the rack base.
E 36
S
H
S
H
5
H
19
5
S