Maintenance And Inspection - Jungheinrich ETR 314 Manual De Instrucciones

3

Maintenance and inspection

A thorough and professional maintenance service is one of the most important
requirements for the safe use of the industrial truck. Ignoring regular maintenance
intervals can cause the truck to break down and presents a potential danger to
personnel and equipment.
IMPORTANT Operating conditions for the industrial truck can have a significant impact on
the life of service components.
We recommend that a customer consultant from Jungheinrich perform an on-
site operational analysis and define maintenance intervals to minimize
damage due to wear.
The indicated servicing intervals are based on single-shift operation under
normal operating conditions. For applications in dusty environments,
involving large temperature fluctuations or multiple-shift operation, the
servicing intervals must be shortened accordingly.
The maintenance checklist below sets out the jobs to be done and the intervals at
which they are required. The maintenance intervals are defined as follows:
W = Every
A = Every
B = Every 1000 operating hours, or at least once a year
C = Every 2000 operating hours, or at least once a year
NOTICE W maintenance must be performed by the owner.
When the industrial truck is being broken in - after approx. 100 operating
hours - the owner must check the wheel nuts and wheel bolts and tighten
them if necessary.
50 operating hours, or at least once a week
500 operating hours,
G 7