Jungheinrich ETR 314 Manual De Instrucciones página 48

Error Error text
104
105 CABEL TEMP MOT
106 CABEL TEMP CON
107 ELECTR SYSTEM
108
109 BREAK PEDAL
110 CONTROLLER
111 CHECK STEER
112
113 CHECK LIFT
114 SHIFT POSITION
115
201 SENSOR
202 TEACHIN WRONG
203 SENSOR
204 CONTROLLER
205 MP MISSING
240 CONTROLLER
250
252
Explanation
Sensor bearing does not
deliver pulse on system
start
Motor temperature
sensor providing
incorrect values
Controller temperature
sensor providing
incorrect values
Lock switch
Voltage out of range
Controller calibration
value incorrect
Brake pedal defective
Multifunction controller
power output defective
Drive control not
receiving telegrams from
steering control
Lift control not sending
"I'm alive" messages
No shift path reference
on switch-on
Main contactor
implausible
Height sensor defective
Too many reference
points for height sensor
Analysis of height sensor
implausible
Error reading the
EEPROMS height
preselection
No Multipilot in vehicle
No height actual value on
job input
The height is invalid
for the storage level
entered
Incorrect entry
Height preselection
Solution
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Check battery voltage;
charge battery
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, shift fully
forward and fully back
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Turn off / on, call service
Make correct entry
Make correct entry
E 17