Handling By Crane; Crane Points; Loading The Battery With The Crane - Jungheinrich ETR 314 Manual De Instrucciones

2

Handling by crane

2.1

Crane points

IMPORTANT Use only lifting gear with an adequate load capacity (for vehicle weight see
"Nameplate, vehicle" in Chapter D).
Switch off and secure the vehicle
(see "Switching off and securing the vehicle" in Chapter E).
– Attach the crane harness to the mast (1).
– Attach the crane harness to the overhead guard (2).
– Secure vehicle with wedges to prevent it from accidentally rolling away.
IMPORTANT Attach the crane harness to the attachment points so that it is impossible to
slip! Attachment mechanisms on the crane harness must be attached so that
they do not touch any attachments during the lifting procedure.
2.2

Loading the battery with the crane

To lift the battery with the crane, attach a suitable lifting device to the four rings of the
battery tray (for weight, see nameplate of the battery)
NOTICE To remove the battery, see "Removing and installing the battery" in
Chapter F.
H 2
1
2