Jungheinrich ETR 314 Manual De Instrucciones página 112

Electric 8.1 Check motor mounting
motors:
Battery: 9.1 Check battery cable for damage, replace if necessary
9.2 Battery cart lock, check function and setting
9.3 Check acid density, acid level and cell voltage
9.4 Check connection terminals for tight fit, lubricate with pole
grease
9.5 Ensure the battery plug connections are clean and
seated securely.
Mast: 10.1 Check mast attachment
10.2 Check lift chains and chain guide for wear, adjust and
lubricate
10.3 Check tilt cylinder bearing and mounting
10.4 Check panthograph for wear and damage and lubricate
10.5 Visually inspect rollers, gliding parts, and stops
10.6 Check mast bearing
10.7 Check forward shift device for wear and damage and
lubricate
10.8 Check fork arms and fork carrier for wear and damage
Attach- 11.1 Cleaning and lubrication
ment:
11.2 Check for completeness: slide shoes for guides
11.3 Checking the axial play of the front and rear rollers
(with adjustment if necessary)
11.4 Check of hydraulic connections (retightening if
necessary)
11.5 Check of cylinder seals
11.6 Checking the cylinder piston rods and their sleeves
General 12.1 Check electrical system for short-circuits to frame
checks:
12.2 Check travel speed and braking distance
12.3 Check raising and lowering speed
12.4 Check safety devices and cutouts
Lubrica- 13.1 Lubricate vehicle as per lubrication chart
tion ser-
vice:
Demon- 14.1 Test drive with rated load
stration:
14.2 On completion of maintenance, demonstrate the vehicle
in front of an authorized person
Maintenance intervals
Standard
Refrigerated warehouse
= t
W A B C
= k
t
t
t
k t
k t
k t
t
k t
t
t
k t
t
t
k t
k t
k t
t
t
t
k t
k t
t
t
t
k t
t
k t
G 9