Raising And Lowering Load Units - Jungheinrich ECR 327 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2.3

Raising and lowering load units

IMPORTANT Before lifting a load unit, the driver must be sure that it is palleted correctly
and does not exceed the permitted load capacity of the vehicle.
– Move the vehicle's fork arms as far as possible under the load unit. Long goods
must not be picked up transversely.
IMPORTANT The load unit must be picked up so that it does not project significantly
(< 2 inches (50 mm)) beyond the tips of the fork arms.
Raising and lowering
NOTICE
The fork is raised or lowered at a predefined speed by pressing the "Up" or
"Down" buttons.
9
Raise
– Press the "Up" rocker switch (9). Hold down the rocker switch until the lift height is
reached.
Lower
– Press the "Down" rocker switch (8) to lower the fork.
8
9
8
E 13

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ecr 336

Tabla de contenido