Engine Oil Filter; Air Filter; Lubrication; Engine - TRAPP LT4217 Manual De Instrucciones

3. Remove the drain cap and drain the oil into a
suitable container, with a capacity of more than
3 liters;
4. Maintain the oil filter (if equipped) as instructed in
your engine operator manual;
5. Refuel the engine with new oil as instructed in
your engine operator manual;
6. Replace the dipstick. Refer to your engine
operator manual for the specification and quantity
of the oil.
Warning!
For more information on oil change, refer to the
engine instruction manual.
Image 19-1
144
Rotate
counter-clockwise to open
Open
Closed
Image 19-2

Engine oil filter

Replace the engine filter at each station or at every
oil change if the tractor is used for more than 100
hours per year.

Air filter

Maintain the pre-filter, if equipped, and the filter
element, as instructed in your engine operator
manual.

Lubrication

Warning!
Before lubricating, performing any maintenance or
repair, turn off the blades, set the gearshift lever
to NEUTRAL, trigger the parking brake, turn off
the engine and remove the ignition key to prevent
accidental starting.

Engine

Lubricate the engine with lubricating oil as
instructed in your engine operator manual.
Joints and lubrication points
Lubricate all lubrication points in the steering
system, brake and hinges of the desk height system
at each work session with a light lubricating oil.
www.trapp.com.br