Stationary Speed/Brake Control Lever; Mower Set Actuating Lever (Pto) - TRAPP LT4217 Manual De Instrucciones

Forward gear
Mowing
speed
Neutral
Reverse gear
Image 14
This tractor model has the indicated position for
mowing and faster advance for displacement.

Stationary speed/brake control lever

The speed lever is located
on the left side of the panel,
allowing you to adjust the
speed of the tractor. To use
it, press the brake pedal
and move the lever up to
increase speed.
When the desired speed is
reached, leave the lever at
this point to maintain the
speed.
To trigger the parking brake, fully press the brake
pedal. Move the speed lever all the way down to
the PARKING BRAKE position, release the brake
pedal to activate the parking brake.
To deactivate the parking brake, fully depress the
brake pedal, move the speed lever to a suitable
speed and release the brake pedal slowly.
128
Note:
For lawn mowing, position 4 is ideal. Positions over
level 4 are indicated for offsets.
Warning!
For tractors with mechanical transmission, never
switch gears (front or rear) while the tractor is in
motion. Always stop the tractor completely before
changing gears.
The parking brake must be activated whenever
the operator gets up from the seat, otherwise the
tractor will switch off automatically.
Make sure that the brake can keep the tractor
stopped.

Mower set actuating lever (PTO)

Located on the right side
of the tractor, it is used to
drive the blade or other
attachments that
connected. To move it, slowly
move the lever forward. To
deactivate the blade or other
accessories, move the lever
all the way back. The blade
drive lever must be off to
power the tractor.
Note:
Always make sure that the blades are fixed and that
there are no objects in the blades range of action.
www.trapp.com.br
are