Mounting The Deck - TRAPP LT4217 Manual De Instrucciones

Image 22
6. Repeat the steps above the right side of the tractor;
Note:
The safety clamps cannot be reinstalled from top
to bottom.
7. Move the mow height adjustment lever to the
highest position and move away the arms that hold
the deck;
8. Remove the clips that hold the stabilizer rod deck.
Carefully slide the deck forward, making the deck
hooks loosen from the stabilizer bar, as shown in
Image 23;
Image 23
9. Carefully remove the PTO cable (A) from the
bracket located on the rear of the mowing deck by
removing the securing clip. Remove the spring from
the mowing deck bracket, as shown in Image 24;
146
D
C
Image 24
10. Carefully slide the mowing deck from the right side
Image 25

Mounting the deck

To mount the mower deck, park the tractor on a
level surface and follow these steps:
1. Position the mower deck on the right side of the
2. Trigger the parking brake and move the mow
3. Put the belt forward and check that the track
A
of the lower part of the tractor. To facilitate, turn the
steering wheel all the way to the left.
tractor and turn the handwheel all the way to the
left to facilitate assembly, as shown in Image 25;
height adjustment lever to the lowest position;
Beware!
The mowing height adjustment lever has a spring
effect. Hold this lever firmly, lower it slowly and
snap it into its lowest position.
is suitable for all channels of the mowing deck
pulleys;
www.trapp.com.br