Tabla de contenido
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
To get maximum performance, lubricate the wheels
and all points such as pivots with the motor oil every
25 hours.
To lubricate the motor, refer to the "Motor
Instructions Manual".
Keep all nuts and screws tight to make sure the
mower is in usage conditions.
Every time grass is mown, remove all the grass from
the base, both on the top as in bottom of the mower.
Check the cutting blades for
The use of TRAPP original blades.
The correct sharpening of the cutting area and for
optimum balance.
Proper assembly.
Oil change
To make the oil change, proceed as described as
follows, according to the output of each motor.
Lawn mowers with 6 HP motors have the EXI
technology and is not necessary to change the
motor oil, but only to maintain the level measuring
the level by the oil dipstick. The recommended for
this motor is the 5W30 oil-synthetic.
For the lawn mowers with 3.5 HP, 3.75 HP and
5.00 HP motors the oil change should be done by
the top of the motor. Open the motor oil cover and
tilt the machine. Recommended for these motors is
the 20W50 oil.
Attention!
Drain the oil during the motor is hot, in a
suitable container.
Maintenance and Storage
Attention!
When draining oil from the upper part of the
oil filling tube, the fuel tank must by empty. If
not, fuel may leak and cause fire or explosion.
To empty the fuel tank, leave the motor
running until it stops due to lack of fuel.
Maintenance
Repairs to the machine should only be
carried out by qualified professional and
TRAPP original parts. Always use the
services of TRAPP Authorized Service
Centers.
TRAPP is not responsible for damages
caused by the use of non-original parts.
53
Tabla de contenido
