Triggering The Parking Brake; Adjusting The Mowing Height - TRAPP LT4217 Manual De Instrucciones

4. With the light on, the tractor can move in
reverse with the blades active;
5. Always look back and forth before and while
moving backwards to make sure that children
are not around;
6. Choose the desired mowing height and start the
operation.
When you move forward again, set the start
key to the NORMAL MOWING position.

Triggering the parking brake

To trigger the parking brake:
1. Fully depress the brake pedal and hold it in this
position;
2. Move the speed lever all the way down and leave
it in the PARK BRAKE position;
3. Release the brake pedal to engage the parking
brake.
To deactivate the parking brake:
1. Fully depress the brake pedal and move the PARK
BRAKE speed lever to the desired speed.

Adjusting the mowing height

1. Select the height by setting the mowing height
adjustment lever to one of the five available
positions;
2. Adjust the mower deck wheels, if fitted, to be
between 6 mm and 13 mm above the ground
when the tractor is on a flat surface with the lever
in position 1.
130
The cutting height range ranges from about 3.0
 
to 9.5 cm. The heights are measured between the
ground and the edge of the blade with the engine
stopped. These heights are approximate and may
vary according to ground conditions, lawn height,
type of lawn being mowed and tire pressure.
For the hottest months of the year, the lawn should
 
be cut approximately 6.3 cm high. For a healthier
and more presentable lawn, try cutting frequently
after moderate growth.
Warning!
Keep hands and feet away from the outlet opening
of the mower deck.
On the models in which they are equipped, the
wheels of the mower deck are an anti-friction
device and are not suitable for supporting the
weight of the mower deck.
www.trapp.com.br