Malfuctioning,Cause And Cure; Safety Thermostat Recharge - OEM PRATICO C641 Manual De Uso Y Mantenimiento

PRATICO
C641 - C642 - C643
Functioning

5.12 - MALFUCTIONING,CAUSE AND CURE

- The oven does not start:
• Verify the electric connection.
• Make sure the cutout switch is on.
• Contact manufacturer's technical service.
- Pizza is not baked, uniformly:
• The baking surface is dirt: clean the baking surface.
• The baking surface is damaged: replace the surface.
• Adjust the oven temperature.
- Oven malfunctioning:
• The set temperature is not reached:
• Reistances are damaged.
• Make sure the electric oven connection has properly
been carried out.
• Contact manufacturer's technical service.
DANGER
For all other troubles, do not hesitate to
contact manufacturer's technical service.
5.13 - SAFETY THERMOSTAT RECHAR-
GE (Fig. 9)
DANGER
This operation shall be carried out by manu-
facturer's technical service after eliminating
the trouble.
The safety thermostat recharge shall manually be car-
ried out as follows:
DANGER
Disconnect the knife switch placed in the
upper machine side, eliminate the cause of
the thermostat intervention.
Remove the right-hand panel (1).
Press the red push-button (2) on the safety thermostat,
then reassemble all by proceeding in the opposite way.
FIG. 9
2
EN - 25