Oven Lifting; Assembling Of The Components - OEM PRATICO C641 Manual De Uso Y Mantenimiento

PRATICO
C641 - C642 - C643
Installation and connections
Chapter 3
DANGER
All operations described in this chapter
shall be carried out by skilled and author-
ized technicians, only.
3.1 - OVEN LIFTING (Fig 1)
The oven lifting shall be carried out by using a crane or
a tackle as follows:
• The oven shall slightly alternatively be lifted from its
four sides using a lever and making sure the panels are not damaged, then the oven shall be positioned
on shims (1).
• Insert two belts (2) being properly dimensioned ac-
cording to the weight of the oven, under the base (3)
of the latter and connect them with a hook (4) of a
crane or a tackle.
ATTENTION
To hoist the machine do not use steel belts
as they may damage the outside body.
3.2 - ASSEMBLING OF THE COMPO-
NENTS
IMPORTANT
Regarding the assembling of the support,
the hood and the relevant components,
please follow the instructions in the relevant
handbooks.
Two-, three-chamber oven assembling (Fig. 2)
• To assemble the two-chamber oven, position the
second oven (2) the first oven (1) and fix it by the
small bracket (3) and the screws (4).
• Concerning three-chamber ovens, the third oven shall
be put onto the second one and fixed as above.
FIG. 1
FIG. 2
4
4
2
3
1
EN - 11