Unit Lifting; Vertical Handling Of The Oven; Assembling Of The Components - OEM SUPERTOP Manual De Uso

SUPERTOP - SUPERTOP VARIO
Installation and connections
Chapter 3
DANGER
All operations described in this chapter
shall be carried out by skilled and author-
ized technicians, only.
3.1 - UNIT LIFTING (Fig. 1)
Lift the unit through a suitable device, such as a crane
or an hoist, complying with the following instructions:
• The oven shall slightly alternatively be lifted from its
four sides using a lever and making sure the panels
are not damaged, then the oven shall be positioned
on shims (1).
• Insert the two belts (2), suitably dimensioned accord-
ing to the weight of the unit, under the base (3) of the
unit and connect them to the hook (4) of the crane or
the hoist.
ATTENTION
To hoist the machine do not use steel belts
as they may damage the outside body.

3.2 - VERTICAL HANDLING OF THE OVEN

(Fig. 2)
• Remove the refractory surfaces.
• Position a pallet trolley on the floor, etc.
• Turn the oven vertically so that the side with the
control panel (1) faces upward.

3.3 - ASSEMBLING OF THE COMPONENTS

Trailer-mounted support assembling
To mount the wheeled base unit, the instruc-
tions contained in the manual supplied with
the latter shall be followed.
IMPORTANT
FIG. 1
FIG. 2
FIG. 2
1
EN - 15