Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RDV-1050 DVD Player
Resuming Playback
The RDV-1050 can remember the position on
a disc where you interrupt playback and re-
sume playback from that position later. There
are three resume modes; ON, OFF and DISC
RESUME. The mode is set at the factory to ON.
You can select the mode using the Preference
settings. See the Selecting Preference section.
When the Resume Mode is ON
During playback if you press
the RDV-1050 stops playback and remembers
the position where playback was interrupted.
The TV screen shows RESUME STOP and the
display window shows [– – – – RESUME] (for
DVD Audio or Video discs) [– – RESUME] (for
SVCD/Video CD discs). The remembered po-
sition is not lost if the RDV-1050 is turned off.
When you turn off the RDV-1050 after set-
ting the resume function, simply press
f8
. The RDV-1050 is turned on, and play-
back starts from the interrupted position. If you
turn on the RDV-1050 by pressing STANDBY
1
button
then press
(PLAY), playback starts
/
from the beginning of the disc. Note that the
remembered position is cleared if you open
the disc tray.
When the Resume Mode is
DISC RESUME
When you press
(STOP)
.
RDV-1050 stops playback and remembers the
interrupted position. The TV screen shows RE-
SUME STOP and the display window shows
[– – – – RESUME] (for DVD Audio or Video
discs) [– – RESUME] (for SVCD/Video CD
discs). The remembered position where play-
back was interrupted is not cleared if you open
the disc tray or turn off the RDV-1050.
NOTE: The RDV-1050 memorizes inter-
rupted positions for the last 30 discs
played. Storing a new interrupted position
will erase the interrupted position stored for
the first disc.
To clear the memory
00
Press
(STOP)
while disc play is
.
stopped.
To Resume Playback
When the resume mode is ON
While the disc that you interrupted playback
of is still on the disc tray, press
The RDV-1050 resumes playback from the po-
sition where playback was interrupted. The
TV screen shows RESUME PLAY.
To play back from the beginning of the disc
(STOP)
.
f8
.
When the resume mode is DISC
RESUME
00
(STOP)
.
Press the OPN/CLS button
panel or the OPEN/CLOSE button
remote control to open the disc tray and in-
sert a disc for which the RDV-1050 has stored
an interrupted position. The TV screen shows
RESUME STOP.
Press
/
RESUME PLAY and the RDV-1050 resumes
(PLAY)
playback from the position where playback
/
was interrupted.
To play back from the beginning, after inserting
the disc, press
(PLAY) to start playback.
/
NOTES:
If you change the RESUME setting from
DISC RESUME to OFF or ON, you cannot
resume playback of a disc whose "resum-
ing" position is stored. However, when you
reset RESUME to DISC RESUME, you will
0 0
the
then be able to resume playback of the
disc.
If you interrupt the playback of a disc for
which an interrupted position has already
been stored, the memory will be updated
with the new interrupted position.
For a double-sided DVD VIDEO disc, the
RDV-1050 regards each side as a different
disc. Therefore, to resume playback of such
a disc, the disc must be inserted with the
same side down.
When the RDV-1050 memorizes an inter-
rupted point for a disc, it also memorizes
Audio, Subtitle and Angle settings.
The RDV-1050 may not resume playback
exactly from the interrupted point. In the
case of an SVCD/Video CD disc with PBC
function, the RDV-1050 may resume play-
back from a point slightly earlier or later
than the point where playback was inter-
rupted.
(PLAY)
/
00
before pressing
/
9
on the front
2
f8
(PLAY)
. The TV screen shows
(STOP)
00
before pressing
.
14
Various Speed Playback
To Rapidly Advance or
Reverse Playback
f8
.
During playback, press
the remote control unit. You can select from
1.5 times, 5 times, 20 times and 60 times nor-
(PLAY)
mal speed. Pressing
the RDV-1050 to normal playback.
During playback, hold down
Playback is advanced or reversed at 5 times
normal speed.
on the
During rapid playback, the sound is muted
except when playing an Audio CD or Audio
DVD, and when playing a DVD VIDEO or
Video CD at 1.5 times normal speed. For Audio
CD discs, the sound is heard intermittently.
1.5x Quick Playback With
Sound
When you select 1.5 times normal speed play-
back, the disc is played back with sound.
• For DVD VIDEO discs, the subtitles remain
on.
• If the sound of a DVD VIDEO disc is recorded
in Dolby Digital or DTS format, stereo lin-
ear PCM signals are output. With some DVD
VIDEO discs, the sound quality and volume
may be altered, or the sound may be out
of tune.
• To switch from rapid reverse playback to x1.5
Quick Playback, first press
g
then press
]
To Advance a Still Picture
Frame by Frame
With disc play paused, press
d-
. Each time you press
still picture advances to the next frame. Press
f8
(PLAY)
/
back.
g
-
or
on
]
[
f8
(PLAY)
returns
/
9
s
or
.
{
}
f8
(PLAY)
,
/
once.
(PAUSE)
,
(PAUSE), the
,
to return to normal play-
Capítulos
Tabla de contenido
