Checking The Sampling Frequency And; Quantization Bit Length; Menu Bar Functions - Rotel RDV-1050 Manual De Instrucciones

Checking the Sampling
Frequency and

Quantization Bit Length

You can check the sampling frequency and
quantization bit length of digital audio during
playback. Press and hold down the AUDIO -
]
fs/Rate button for a few seconds. The sam-
pling frequency and quantization bit length of
the current digital audio are shown in the dis-
play window temporarily. When the audio is
recorded using a surround audio format, the
sampling frequency and quantization bit length
are shown for the front speakers.
(Example)
Quantization bit length
The sampling frequencies indicated are as
follows: 44.1, 48, 88.2, 96, 176.4, and 192
(kHz). Any figure below the first decimal place
is omitted in the display window.
NOTES: With some discs, NO INFO. may
appear instead of the sampling frequency
and quantization bit length.
The sampling frequency and quantization
bit length cannot be displayed with VR for-
mat discs.

Menu Bar Functions

To Display a Menu Bar
1 With a disc is loaded, press ON SCREEN
l
. A status bar for the type of disc inserted
will appear on the TV screen.
21
2 Press ON SCREEN again. A menu bar for
the type of disc inserted will appear under
the status bar.
Sampling frequency
To turn off the menu bar and status bar press
ON SCREEN again.
The indicator on the right end of the menu bar
shows the status of the player:
– Playback mode.
– Stop mode.
– Pause mode.
– Fast forward/backward playback
mode.
– Slow-motion playback mode.
Basic Operation Procedure
1 Press /
to work with. The selected icon is indicated
by
2 Press ENTER
propriate pull-down window appears how-
ever, there are some exceptions.
NOTES: A mark or text on the menu icon
for the function or mode currently selected
is shown in green.
Some functions are not available during
playback. (You cannot move
sociated icon when it is not available.)
qk
to select the icon you want
.
;
. With many icons an ap-
to the as-
Menu Bar Functions for
DVD AUDIO
Time Mode Selection
During playback, selects the time mode shown
in the display window and in the status bar.
;
Press ENTER
to select the time mode from
the following.
TIME: Current track elapsed time
REM: Current track remaining time
TOTAL: Current group elapsed time
T.REM: Current group remaining time
Repeat Mode
Selects the repeat mode during playback.
1 Open the pull-down window.
jw
2 Press / to select the repeat mode
from the following.
TRACK: Current track repeat
GROUP: Current group repeat
A-B: A-B repeat
OFF: Repeat mode deactivated
;
3 Press ENTER to make the selected re-
peat function active.
Time Search
Specifies a time from the beginning of the current
title from which to begin playback.
TRACK
Track Search
During playback, specifies a track to be played.
1 Open the pull-down window.
4
2 Press numeric buttons
a desired track number. (For example, to
specify "10," press 1, then 0.)
;
3 Press ENTER to begin playback from
the specified chapter.
PROG.
Program Playback
While stopped, specifies the playback order
of tracks.
RND.
Random Playback
While stopped, activates random playback.
Audio Selection
During playback, selects the audio language
or sound track.
1 Open the pull-down window.
jw
2 Press / to select a desired au-
dio language or sound track.
;
3 Press ENTER to begin playback with the
selected audio.
English
(0 to 9) to enter