Idiomas disponibles
Idiomas disponibles
Pre-Operation
LOCATION
Selecting the proper location can significantly increase performance,
reliability and life of the unit.
For best results locate the unit in an environment that is clean and
u
dry. Dust and dirt in the unit retain moisture and increase wear of
moving parts.
Engine
Frame
Figure 1 - Mounting schematics (NOTE: all measurements are in inches)
49.00
Lower Frame Mounting Feet
10.67
There are mounting holes in the bottom of the open frame to
u
permanently mount the unit if desired. The bolt pattern is 18
inches x 18.76 inches and will accept 1/2 inch bolts.
Store electrodes in a clean, dry location with low humidity to
u
preserve the flux coating.
Belt Guard
Ø .64
4 Mounting Holes
for a 1/2 inch Bolt
0.50
18.76
4 X 1.00
3.72
18.00
Gauge Guard
11.63
22.97
9
